- Available with billet or cast aluminum housings
- Dual idler gear configuration maximizes strength
- Cool, quiet, precision-ground gears made from 9310 alloy billet steel
- 1.5 in. diameter 4340 hardened steel drive shaft
- Housings use gaskets or O-rings that don’t let anything through
- Universal hub fits all major bolt patterns
- Gear reduction reduces stress on your drivetrain
- Dual idler gear configuration adds a 1” offset
- Lighter than the competition
Wheel Requirements:- 18” or larger wheel required
- 20” and larger wheels cannot exceed 5” backspacing
Unbeatable GDP Portals
You’re crawling through the mud and suddenly your RZR’s stuck. Next time, be prepared for the bog with SuperATV’s Polaris RZR Pro R 6" Portal Gear Lift. You get better torque to power your rig through even the deepest sludge and a lift to dominate obstacles. Choose from a 30%, 45%, or 60% gear reduction and cast or billet aluminum housing. Or take your rig to the extreme with our dual idler option. No matter how you ride, there’s a GDP lift for you.
What Are Dual Idler Gears?
What’s a dual idler and why should you care? Two idler gears spread the load over twice as much surface area for better torque transfer, making this the strongest gear combination you can get in a portal. We made the gears from durable 9310 steel alloy for maximum toughness and precision ground them with a CNC process for a perfect fit. Basically, we built these portals for maximum efficiency and durability. There’s not a mud bog, creek bed, or nasty trail that could hold you back with a dual idler setup.
Pick Your Perfect Gear Reduction
When you’re thinking about GDP portals, gear reduction is one of the most important choices you can make. Lower gear reductions won’t cap off your rig’s top speed too badly and will give you improved torque. Higher gear reductions will give you maximum power, but will limit your top speeds. You can choose between 30%, 45%, and 60% gear reductions for the perfect match of performance and speed.
Save Your Drivetrain
With a GDP portal, the gear reduction is right in the hub. That protects other more expensive drivetrain components from unnecessary wear and tear. Your transmission, axles, differential, prop shaft, and CVs will thank you for choosing GDP portals.
GDP Portals Are TOUGH
We built GDP portals to be tough. That’s why everything from the billet housings to the advanced 5/16” steel alloy backing plates are designed to be as strong as possible. Go ahead, abuse them—our portals can take it.
- Our housings are reinforced for gear retention and optimized for oil flow
- Advanced steel alloy backing plates are stronger than chromoly
- Enhance with Portal Blood—gear oil formulated for GDP Portals
- There are no gimmicks and no vents because vents do more harm than good—we know because we tested them
Advanced Gaskets, Seals, and Bearings
Our portals use:
- Advanced Gaskets and O-rings with excellent oil resistance and low deterioration rates
- A sealed input gear and double-lipped output seal
- 100% sealing coverage throughout so you can forget about oil leaks
- Double-angular contact output bearings to prevent premature wear
- Roller idler and drive bearings to maintain perfect gear meshing
Top-Rated Customer Service
Still need a little help getting exactly what you need? We’ve got a dedicated team just for portal support. Give us a call so we can get the perfect set of portals in your hands ASAP.
6” Portal Gear Lift Includes:
- (4) Assembled portal hub boxes complete with 9310 gears, seals, output shaft, gaskets, and thrust bearings
- (4) Universal hubs and precision-ground stainless steel slotted rotors with lugs
- (4) Specialized steel alloy backing plates
- (4) Steel caliper mounting plates
- (4) Caliper adapter plates
- (2) Rear hub adapters
- (2) Steel steering arms
- Extended brake lines
- All required hardware, including recessed castle nut socket
WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.
POLARIS RZR PRO R 6" PORTAL GEAR LIFT
- Polaris RZR Pro R Sport : 2022+
- Polaris RZR Pro R Premium : 2022+
- Polaris RZR Pro R Ultimate : 2022+
- Polaris RZR Pro R 4 Sport : 2022+
- Polaris RZR Pro R 4 Premium : 2022+
- Polaris RZR Pro R 4 Ultimate : 2022+
Limited Lifetime Warranty
When filling gear box use only 80W-90 gear oil. Using grease will cause failure of gears and bearings. Using grease will void your warranty.
SuperATV takes pride keeping your GDP Portal Gear Lift in working order. That’s why we give you, the original purchaser, a lifetime of portal protection contingent on the following conditions. SuperATV warrants this product and its parts (excluding bearings, rotors, seals, & gaskets). Warranty is limited to material and / or workmanship defect at the time of shipment from the factory, and in no event shall seller have any liability for consequential damages of any kind resulting from a breach of this warranty. This warranty will be void on all products that show evidence of misapplication, improper installation, abuse, lack of proper maintenance, negligence, or alteration from original design. This warranty is in lieu of any other warranties, either expressed or implied, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTIBILTY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Procedures for obtaining warranty service:
Should you have any problems with your Gear Driven Performance product, please call SuperATV Customer Service at 855-743-3427. Please have a copy of your original purchase receipt available, with dealer name (if applicable), date of purchase, and invoice number when calling for technical help. Most often, installation, or break in procedural issues (See break in procedure information, located in the instructions) can be handled quickly by speaking with one of our customer service representatives.
If it is determined that repairs are required to your Gear Driven Performance portal, you MUST acquire an RGA number from our customer service team. RGA's and repair services are ONLY rendered by SuperATV. Any shipping costs incurred after 30 days (starting from the original purchase date) on any Portal returned for repair is the customer's responsibility. ALL Portals must be returned in the original box, with the original packaging, or a similarly well protected box. ALL portals must have the RGA number clearly written on the outside of the package. NO COD packages will be accepted, and no package will be accepted without an RGA number written on the outside of the box. Shipping information, including address and method, will be given to you by our customer service team and/or listed on our website when you create your RGA.
Upon arrival of your warranty parts we will have them inspected by our technicians to determine if the damage was a manufacturing defect or rider/installation error. The inspection usually takes place 1-2 days after the package arrives. SuperATV will then call you with the results of the inspection. Depending on the outcome of the inspection, you may be required to pay a replacement fee for the broken parts (prices may vary depending on parts that need to be replaced). We do our best to get your issues corrected as soon as possible so you can get back out on the trails. We also match shipping labels for our customers. If you ship the warranty parts to us with an overnight label, we will return the favor and send you the replacements parts on an overnight shipment at no charge.
If you have product that is outside of warranty coverage or it is determined that product shows evidence of misapplication, improper installation, abuse, lack of proper maintenance, negligence, or alteration from original design. Customer will be notified and we will repair for a $250 fee.